Gutter replacement cost depends on the measured roof edge, the system being installed and the condition of the attachment surface. A national price range can help with early planning, but it cannot tell you what removing and replacing the gutters on your particular house will cost. Compare written estimates for the same scope before choosing an installer.
What published 2026 estimates can tell you
Angi’s installation cost guide, updated October 16, 2026, reports a typical project range of $629–$1,736 and a broad installed range of $4–$40 per linear foot. These are Angi’s published figures, not a GutterHelp USA survey or an offer available through this website. The range spans different materials and jobs; it should not be treated as a fixed price for a complete replacement.
The useful question is not whether your estimate matches a national average. It is whether the estimate describes your actual job, including removal, downspouts, access and any damaged wood. A shorter, straightforward installation is a different purchase from a complete system replacement on a complex roofline.
Separate the gutter price from the rest of the job
- Gutter runs: ask for the measured linear footage, material, profile and size. Floor area alone is not a reliable measure of gutter length. Compare seamless and sectional gutter construction separately from material and size.
- Outlets and downspouts: identify the number, size, locations and intended discharge points. Ask whether extensions are included.
- Removal and disposal: confirm whether the crew removes the old system and takes away the debris.
- Attachment and roof-edge work: ask how loose fascia, failed fasteners or flashing issues will be assessed and priced.
- Access and extras: identify difficult roof edges, guards, finish options, permits where applicable and other separately priced work.
A calculation example, not a market quote
Suppose an estimate lists 150 feet of gutter at an assumed $12 per foot. That line item is 150 × $12 = $1,800. This example demonstrates arithmetic only: it does not establish a recommended rate or include items the estimate lists separately. Add the actual downspout, removal, repair and other charges from the same written estimate to compare totals.
How to compare two bids fairly
Put the estimates side by side and mark every difference in length, material, size, downspout count and exclusions. A lower total with fewer downspouts or no removal allowance is not the same scope at a lower price. Ask the bidder to clarify omissions rather than filling the gaps with assumptions.
The FTC recommends getting multiple written estimates and understanding differences between them. Use our five questions for a gutter contractor to organize that discussion, including how changes will be approved if hidden damage is found.
Should you repair the existing system instead?
A replacement budget is useful only after the problem has been identified. Ask whether a localized issue can be corrected while keeping the usable parts, and what a replacement would solve that a repair would not. Our repair-versus-replacement guide helps frame that decision; the services guide explains the different types of work.
Sources and editorial review
- Angi: Gutter installation cost, 2026 data — the attributed price ranges above.
- FTC: How to avoid a home improvement scam — written estimates and contractor selection.
Sources reviewed October 28, 2026. This is an editorial planning guide based on published information, not an on-site estimate or engineering assessment. Prices and project requirements vary by location and scope.